Panel Connector Installation for Trim Cover

Panel Connector Installation – Prior to installing the first row of AC Modules, insert Panel Connectors into the Trim Cover at all locations where AC Modules will be installed. If the first row in your solar array will consist of more than one Trim Cover, you will also use a Panel Connector to join together the ends of adjoining Trim Covers.

Each Panel Connector has an arrow on the top surface that should point toward the Trim Cover. To help with alignment, the arrow on the Panel Connector should be aligned with one of the following:

    • The alignment mark on all 2-Panel Portrait Trim Covers.

Panel Connector Installation - The alignment mark on all 2-Panel Portrait Trim Covers

    • The vertical gap created by the installation of two Trim Covers installed side by side.

Panel Connector Installation - Trim Covers installed side by side